Dlp Electronics & Robotics

Electronics

Please fill in as much information as you can based on the template below when adding a new part or material to this Wiki:

  1. Material / Product Name:
  2. Brief Description:
  3. Vendor:
  4. Vendor P/N:
  5. Price:
  6. Link to website:
  7. Link to technical specifications:
  8. Link to Yahoo group discussion:
  9. Notes

Motion Control

Please fill in as much information as you can based on the template below when adding a new part or material to this Wiki:

  1. Material / Product Name: Stepper Motor Driver
  2. Brief Description: Makerbot one axis stepper motor driver with 1/8 micro stepping. Suitable for bipolar (4 or 8 wire) stepper motors size Nema17 or Nema 23
  3. Vendor:Makerbot
  4. Vendor P/N:
  5. Price:$39
  6. Link to website: http://store.makerbot.com/stepper-motor-driver-v3-3.html
  7. Link to technical specifications:
  8. Link to Yahoo group discussion:
  9. Notes : If you like to use one stepper motor this can be the solution
  1. Material / Product Name: 3-axis Stepper Motor Driver
  2. Brief Description:Jaguar 3-axis bipolar micro-step motor driver has a power of 2.5 amp 35 volt output. Jaguar can be used with 4-8 wire bipolar stepper motors.Micro-step resolutions 1/1, 1/2, 1/4 and 1/8 can be selected easily with on board jumpers. The board has current adjustment trimpots in order to be used with any size of motors. (Nema 17 or Nema 23).
  3. Vendor: gnexlab
  4. Vendor P/N:
  5. Price:$120
  6. Link to website: http://store.gnexlab.com/product.php?id_product=19
  7. Link to technical specifications: http://store.gnexlab.com/attachment.php?id_attachment=2
  8. Link to Yahoo group discussion:
  9. Notes: If you like to use more then one motor it is suitable. It also has Optically isolated 4 inputs that can be use for end or home switches. The board also has one relay output that can be used with solenoids for tilt mechanism. One more motor can also be used for tilting the vat.